30" Cambio 5 arm ring debarker, electric drive, includes infeed/ outfeed log troughs and all cont...

Linden step-feeder for logs, 16' long capacity, 15 hp electric powered hy unit, good working cond...

Pro-Cut chop saw, up-cut style, 7" x9" cutting capacity, 22" dia blade, includes 8' infeed/outfee...

Hurdle 3 head-block circle mill, includes 4 blade Cedar Creek vertical edger, includes log deck, ...

Uninstalled and ready to load. In very good condition with 6,067 hours, featuring a 30 HP electri...

10.1 liter, 300 HP industrial engine (not actual photo). Factory rebuilt with 2,230 hours since r...

Cleereman 3 head-block, 36" carriage, Timber Tiger electric set-works, includes track/ drive/ 60"...

Hyd unit, 10 hp electric powered, vane type pump, approc 25 gal capacity, includes several flow c...

2 strand green chain, 5' 6" wide x 32' long, gearbox drive, C-55 rooftop chain, good working cond...

Brewco edger, 4" thick x 20" wide capacity, powered by 2 separate electric motors, includes 16' l...

Hyd reservoir with oil cooler, approx 20 gal, good working condition

Air compressor

Armstrong band saw sharpener, electric drive

36" bar type Log Turner (Sawmill), all hyd, good working condition

10"x60' waste conveyor H78 chain with paddles, electric drive ,includes new chain

Baker single head resaw, Model; BBR-O, Serial#; 04-3371, has tilting infeed belt w/ digital displ...

concave belt conveyor, 24" wide x 30' long, electric drive, good condition

waste conveyor used for chips, 18" wide paddles x 12' long, electric drive, heavy duty built and ...

air-lock 13" inlet/outlet, gear box drive, good condition

Helle cable drum unit for carriage drive, drum is 13 1/2" dia x 16" wide, hyd drive, good working...

48" dia blower, 17" inlet/ 16"outlet, 40 hp electric power, good condition

2 way chip diverter, good condition

36" dia chip blower, single chip loading chute, outlet 12" x 14", good working condition

Meadows 36" chain type Log Turner (Sawmill), hyd drive, working condition

Mellott #5, 42" Log Turner (Sawmill), hyd drive, working condition

Ingersoll-Rand screw compressor, 50 hp electric power, approx 225 CFM, good operating condition Hours: 21864

Ingersol-Rand Pac-Air screw compressor, 125 hp electric motor, not tested but appears good Hours: 25346

Kaeser screw compressor, approx 15 hp, working condition

Hyd power unit, 15 hp electric power, vane type pump, includes 4 electric valves, approx 60 gal c...

Hyd power unit, 7 1/2 hp electric power, enclosed pump unit, includes large control panel, approx...

HMC AC-40 4 head-block carriage, Silva-Tech set-works with spare parts, air dogs, husk has 48" di...

Hyd power unit, 7 1/2 hp electric power, vane type pump, good condition

hyd reservoir, approx 35 gal capacity, good condition

Hyd unit, 15 hp electric motor, vane type pump, approx 80 gal capacity reservoir, good working co...

2 strand transfer deck, 50" wide x 40' long, electric drive, very good condition

hyd unit, 5 hp electric drive, pressure comp pump, cooling radiator, approx 30 gal capacity tank,...

hyd unit used on Fulghum rosser-head debarker, 15 hp electric drive, 2 stage vane type pump, appr...

Tyrone Berry carriage drive, cooling radiator, working condition

Tyrone Berry carriage drive, cooling radiator, no power

Tyrone-Berry feed, SMA-285 carriage feed, includes cable drum and hyd unit, good working condition

hyd unit, 10 hp electric drive, approx 160 gal tank, pressure comp pump, good working condition

Jeffrey vibrating conveyor, 18" wide pan x 36' long, 6" tall sides, electric drive, good working ...

Mellott rosser-head debarker, electric drive, hyd cylinder for head up-down, recently in producti...

Irvington-Moore 7 strand unscrambler, 75" tall, includes even-end rollers, electric drive, good w...

Comact Maxi-Tour merchandising saw system, 72" dia blade, 75 hp electric drive, includes infeed/o...

Industries PHL log length scragg mill, 48" dia. blades, electric drive, 2 slab drop belts, all el...

30" dia Cambio ring debarker, 6 arms, steel infeed press wheels, all electric, all electrical and...

Morbark shaker screen for a 58" dia chipper, good working condition

log trough 36" wide over-all 19' long, electric drive, good working condition

Fulghum 6 knife chipper, 60" dia, top discharge, working condition

4 strand log deck, 13' wide x 21' long, electric drive, good condition

Operator/ sawyer cab, 4'6" wide x 13' long x 7' tall, includes air-ride seat, good condition

Precision vibrating conveyor, 18" wide pan x 30' long, 12" tall sides, BRAND NEW fiberglass paddl...

40' long, 110 ladder-back chain, 14" wide, s- style drive, no power, good working condition

2 strand transfer deck, 5' wide x 23' long, 81XH chain, BRAND NEW DRIVE SHAFT/ SPROCKETS, very go...

various chipper infeed spouts for vibrating conveyors, call with your needs, $450 each

2 strand transfer deck, 3' wide x 25' long, electric drive, 81X chain, good condition

HMC HC-40, serial #330-1982, 4 head-block carriage, 110 volt electric over air set-works, 50 hp c...

log trough 55' long, 12" pan width, electric drive, good working condition

Cleereman 3 head-block carriage, Silva-Tech computerized set-works, 48' long track/frame, incudes...

3 strand 10' wide x 30' long green chain, Tulsa Winch drive, C-55 rooftop chain, heavy duty built...

3 strand 10' wide X 20' long log deck, Tulsa Winch electric drive, H-78 chain, heavy duty built, ...

4" x 30" wide capacity, 2 movable blades, includes BRAND NEW ARBOR, very good condition

Aerovent dust blower, 48" dia, 20" inlet- 18" outlet, electric drive, good condition

MDI metal detector, built for planer, includes all controls, LIKE NEW CONDITION!

Cornell style barn sweep drive, hyd drive, includes some chain, good condition

Mellott 24" wide pan x 50' long, 8" sides, includes sawdust section and chipper mouth, hyd drive,...

Progress 24" wide pan x 35' long, 9" sides, good condition

Valone Kone ring debarker, electric drive, includes infeed/outfeed, working condition

Fast Line scragg mill, similar to "Big Jake", twin blades 56" dia, electric drive, includes off-b...

Morbark 628 debarker, electric drive, includes operator cab and all controls, very good condition

Koger-Air,14" dia inlet/outlet, electric drive, very good condition

Tyrone Berry SN: A2850, Model:SMA-225, spool of 3/4" steel cable, 60hp electric motor, hyd tank, ...

20" wide x 20' long, 7" sides, electric drive, working condition

Fulghum, 18" wide x 14' long, 9" sides, good condition

3 strand transfer deck, 11' wide x 27'6" long, electric drive, 81X chain, good condition

3 strand transfer deck, 11'6" wide x 28' long, electric drive, H-78 chain, good condition

Hyd reservoir, approx 185 gal capacity tank, excellent condition

Jacobson AC/DC, control box w/250A, 600 VAC 460V transformer, 125hp electric motor w/blower motor

3" x 13" paddles, 16" pan, 15" sides, electric drive, 20" x 68' long, good condition

Armstrong, Model #6 RH, electric drive, no clamp or stands

Armstrong, Model #6 RH, SN: 16154, electric drive, includes extra grinding wheels and all clamps ...

15" ladder back chain, 24" pan, 16" sides, 32" x 53' electric drive, good condition

Syncro Shear,SN:C2521-1, balanced vibrating conveyor, electric drive, 20" pan x 47' long, 14" tal...

Model:36EZTD, SN: 42, 5" x 21' tailing belt outfeed, 38" x 9' infeed rolls, 6" x 36" infeed cap, ...

4 strand, 33" slats on each strand, electric drive, unit is 80" tall, good condition

5 strand, 13' wide x 18' 6" long, H78 chain, electric drive, air cylinders on pop up board stop, ...

75hp electric, double pilot pump, directional valve

50"x 22' overall, air cylinder log clamp down, electric drive, WR124 chain w/cleats, air cylinder...

6" x 42" capacity, MN: HE42, SN: 703-10-81, single arbor, (4) 19" saws, 2 movable blades, 8' infe...

36" wide x 28' long, steel slat conveyor for slabs etc., very good condition

Beloit ring type debarker, electric drive, working condition

30 HP electric motor w/double pump direct mounter, approx. 100 gal tank, lots of electric control...

Tyrone SMA-270, 125hp electric drive, includes hyd unit and cable drum, good condition

5' x 6' cab, good condition

Corley gang edger, 8" capacity, includes infeed/outfeed, electric drive, THIS UNIT NEEDS TO BE RE...

pressure comp pump, has reservoir and cooling radiator

SHOWCASE REBUILT! Baker 5 head resaw, electric drive, includes return belt and 1 turn table, PRIC...

ladderback chain,18" wide pan x 33' long, 12" sides, electric gear box drive, was used on incline...

chain is 11" wide , trough is 38' long, electric gear box drive, 1 set of kickers, heavy duty and...

HMC Model; 1DC, AC carriage drive, complete unit ready to work

15 hp, electric powered, vane type pump, very good condition

30 hp electric drive, approx 70 gal horizontal tank, good condition

Cleereman 3 head-block, 141" knees, Model;36, SN; 115, air set-works, includes 56' of track-frame...

90" wide x 28' long, electric drive, heavy duty and in good condition

6" capacity gang edger, gang side is 16" wide- edger side is 28" wide, this unit will be "SHOWCAS...

carriage track/ frame for HMC model; AC-40 carriage, good condition

rosser head, slant track, working condition

Multi - head trimmer, 7 saws, 6" capacity up to 20' long, electric drive, good condition

40" dia. 30 HP. electric drive, good condition

electric drive, various sizes, good condition prices vary from $2000 - $4000.

4 strand, 10' wide x 22' long, H-78 chain, good condition

7 strand, 12 1/2' wide x 7' long, 81X chain, electric drive , good condition

66" dia. 6 knife, side/ rear discharge, good working condition

48" dia. 6 knife wheel with 3 blocked, bottom discharge, good condition

8'X 8' screen, electric drive, working condition, CALL FOR REBUILDING OPTIONS

rosser head style, all hyd. drive, 36" dia. log capacity x 12' long, very good condition

rosserhead style, in working condition

27" 6 arm, includes lots of new parts, Good Working Condition, price includes some installation c...

Rosser head, slant track, hyd. drive on the head, in working condition, CALL FOR REBUILDING OPTIO...

6', top wheel is 1 1/2" thick, steel slat off-bearing belt, air-strain, this unit is in good work...

6"x42" wide overall, includes infeed and outfeed rollers, working condition

6', top wheel is 1" thick, air strain, was used for a line-bar resaw, good working condition

15 HP. electric drive, 2 pumps, several electric valves, good working condition

5 HP. electric motor, has cooling radiator, tank heater, good working condition

30 in. dia. 15 HP. electric motor, includes mounting plate and pipe, VERY GOOD CONDITION

Slab drop belt, 24" wide x 12' long, electric drive, hyd cylinder for drop belt, includes hyd uni...

48" 6 knife chip-pac, includes 5' x5' shaker screen, electric drive, includes soft start, numerou...

"Hochstetler" band resaw, 12" x12" x 12' long capacity, 2" x 30" band wheels, line-shaft ready, f...

36" chain type log turner, hyd drive, good working condition

Hyd reservoir approx 118 gal capacity, very good condition

Log deck, 3 strands, 12' wide x 23' long, H-78 chain, electric drive, working condition

belt conveyor approx 16" wide x 15' long, 6" tall sides, electric drive, good working condition

Roll case/ transfer deck, rolls are 30" wide x 38' long total length, transfer is 52" wide and 38...

cleated belt conveyor, 24" wide x 18' long, set up for incline, electric drive, excellent condition

Fulghum 48" dia chipper, 3 knives, 150 hp electric drive, 5' x5' shaker screen-electric drive, ch...

Progress waste grinder, swinging hammer style, 125 hp electric drive, 1185 rpm's, unit needs to h...

Mellott rosser-head debarker, your choice of power (electric or hyd), new babbit in bearings, new...

splitter saw, designed to split cants, boards, etc., 50hp electric drive, 81x chain, 40" dia inse...

2 strand transfer deck, 28" wide x 14' long, #80 roller chain, no drive, good condition

rollcase, pop-up rollers, perfect for putting in a transfer deck, 16" wide x 7' long, foot pedal ...

HMC 4 head-block circle mill, complete mill package, includes husk w/ top saw, carriage drive, op...

Tyrone-Berry carriage drive, includes valve for sawyer, good working condition

chain type log turner, 36" chain, hyd drive, good working condition

slab drag, 15' x 15', electric gearbox drive, 81X chain with steel cleats bolted on, good working...

Precision vibrating conveyor, 18" wide pan x 55' long, 8" sides, electric drive, good working con...

chain type log turner, sized for 40" carriage, hyd drive, good working condition

Meadows board edger, 4" thick x 36" wide capacity, infeed rollers, outfeed is a tilt table, line-...

Webster vibrating conveyor, 18" wide pan x 20' long, electric drive, good working condition

Smicksburg vertical band head-rig, line-shaft ready, includes skid of spare parts and is ready fo...

Brewco single head resaw, line-shaft ready, working condition

Reckart cant catcher for drop use with a drop belt, air powered, 4 arms, travel is 30", good work...

Patz style chain barn sweep, hyd drive, 6' flat section, 50' incline section, paddles are 17" lon...

heavy duty transfer deck, 5 strands, 14' wide x 12' long ,electric drive, H-78 chains, very good ...

5 strand heavy duty deck, 12' 6" wide x 25' long, electric drive, H-78 chain, very good condition

Helle 2 blade vertical edger, 22" dia blade, 40 hp electric drive, price includes going through s...

dust auger 12' long- 4" dia auger, electric/ gearbox drive, good condition

4 strand transfer deck, #80 roller chain, electric drive, good working condition

roll case 30" wide x 16' long, rolls have spirals, electric drive, good condition

Quincy screw compressor, Model; QSI245ANA31A, Serial #; 94877, 50 hp electric power, 69,848 hrs, ...

bar type log turner, used with 42" carriage, hyd drive, good working condition

Lots of vibrating conveyors in stock, up to 36" wide pans, hyd drives, electric drives, call with...

Lots of hyd units in stock, vane type pumps, pressure comp pumps, various sizes from 5hp -50-hp, ...

Helle 3 head block, 36" carriage with 124" knees, husk with top saw, 60' long track, frame, 60 hp...

roll case 24" wide x 15' long, 8" dia rolls, good working condition

Corley 3 head-block circle mill, DY turbo- turners, Accura-Set set-works, air over air, almost hy...

6 strand deck, H-78 rooftop chains, electric drive, 14' wide x 27' long, very good condition

Cleereman circle saw husk, for left hand carriage, includes 56" dia blade in good condition, off-...

Belt conveyor 24" wide x 30' long, electric drive, good working condition

8' x 8' screen, electric drive, good condition

rollcase/ pop-up transfer, 30" wide x 13' long, 3 strand transfer, hyd and electric drive, has ca...

36" chain turner, hyd drive, good condition

green chain, 3 strand, 9'6" wide x 101' long, electric drive, 8X chain, good condition

Precision rosser head debarker, 36" capacity, electric drive on head, self-contained hyd unit for...

4 strand transfer deck, 10' wide x 11' long, 5 hp electric gear-box S style drive, 81X chain, hea...

vertical edger, 2 split blades, 40 hp electric powered, good working condition

circle saw husk, fits 56" dia blade, includes off-bearing belt, good working condition

live roll case 24" wide x 15' long, electric drive, 6 1/2" dia rolls, good working condition

PHL Industries 48" dia chipper, 6 knife wheel with 3 blocked, includes some spare knives, good wo...

Helle 4 headblock carriage, complete package includes track-frame, husk, controls, carriage drive...

Precision vibrating conveyor, 18" wide pan x 27' long, 10" tall sides, electric drive, good worki...

Precision vibrating conveyor, 18" wide pan x 20' long, 10" tall sides, electric drive, good worki...

Precision 6 knife chipper and chip-pac, includes Precision 6' x6' shaker screen and cyclone, pric...

drop belt 24" wide x 11' long, electric drive, air cylinder for up-down movement, good working co...

48" dia chipper, 6 knives, includes several sets of spare knives, good working condition

3 strand transfer deck, 7' wide x 11' long, lineshaft ready, good working condition

Precision 58" dia, 6 knife, hard surfaced anvils, Kwik-Change knife system, THIS UNIT IS BRAND NE...

Supreme Mfg rollcase 20" wide x 20' long, 6" dia rolls, 1 7/16" dia shafts, electric drive, BRAND...

roll case, 30" wide x 21' long, 8" dia rolls, this unit is heavy duty and in very good condition

Mellott #6 chain type 48" Log Turner (Sawmill), all hyd, working condition

slab drop belt, 24" wide x 10' long, built for left-hand mill, air cylinder for up-down motion, g...

Eagle Claw saw bits, 9/32", these are comparable to the Simonds dominator, call if you have any q...

Webster vibrating conveyor, 18" wide pan x 25' long, electric drive, includes chipper feed spout,...

chip loading system with dual load-out chutes, good working condition

hyd power unit, 40 hp electric, vane type pump, includes cooling radiator, approx. 120 gallon cap...

Reckart barn sweep, 40" wide x 6' flat x 20' incline sections, electric drive, working condition

Cornell edger 6" thick x 36' wide capacity, 1 stationary-2 movable blades, air-powered hold-downs...

buck saw with log bunk, hyd drive good working condition

Precision vibrating conveoyr, 30" wide pan x 58' long, 12" tall sides, hyd drive, excellent condi...

Froedge 6' lumber stacker, turning fork LH, built for stacking green lumber, includes all transfe...

slab drop belt, 34" wide x 12' long, hyd drive, hyd cylinder for up-down movement, brand new and ...

belt conveyor 12" wide x 16' long, working condition

Morbark 6- knife 58" dia chipper, includes 6' x 6' shaker screen and cyclone, good operating cond...

24"dia Reckart chip blower and dual loadout chutes, no power, good operating condition

chip cyclone, was used with 6' screen, good working condition

10 hp hydraulic power pack, 40 gal. tank, pump Model PVR15-15B15-RF-0-5-A-1, good condition

5' X 5' screen, electric drive, very good working condition

Morbark 640 debark complete line, includes infeed/ outfeed troughs, operating cab and all control...

20 hp electric drive hyd power unit, gear style pump, approx 40 gal reservoir, includes control p...

Newman K-20 double end trim, 22" blades, electric drive, 16' long capacity, good condition

36" dia dust blower, 18" inlet/ 16" outlet, good condition

The Brewer Scragg Mill is a used sawmill designed for efficient processing of short logs, handlin...

3 strand transfer deck, 8' wide x 7' long , hyd drive, good working condition

The Corley Gang Edger is a reliable choice for sawmill operations seeking efficient lumber proces...

belt conveyor 38" wide x 17' long, electric drive, approx 5" tall sides, heavy duty and in good c...

4 strand transfer deck, approx 9' wide x 8' long, H-78 rooftop chain, electric drive, good condition

barn sweep waste conveyor, approx 10' flat section x 50' long incline section, includes 90 degree...

babbit melting pot with work bench that has vice mounted to table, working condition

belt conveyor 24" wide x 9' long, approx 4" tall sides, electric drive, has 2 pinch rollers on dr...

Jeffrey waste grinder, 34" wide capacity, top feed/ bottom discharge, includes new set of hammers...

Meadows 4 headblock carriage, Model; #3 DELUXE, 43" center to center wheels, 110 volt over air so...

Model: 8X8 screen, 1-1/4" screen, SN: FIR-953, good condition

The 30" Heavy Duty Edger is a used sawmill machine designed for efficient board edging. It comes ...

Webster vibrating conveyor, 24" wide pan 9" tall sides, 80' long, electric drive, very good condi...

The complete Morbark debarker setup offered includes essential components for efficient log proce...

This used Helle Circular Mill setup is equipped with a 3 HB, 4 Axle Carriage System and offers a ...

Patz barn sweep drive and barrel of paddles, use for parts

rll case, 18" wide x 25' long, heavy duty and in very good condition

belt conveyor, 60" wide x 50' long ,electric drive, no sides, good working condition

4 strand transfer deck with even-ender rolls, approx 8' wide x 8' long, electric drive, good work...

Cleereman 4 head block , Model 40, air over air setworks, includes cab/track-frame/ carriage driv...

3 strand green chain, 7' wide x 54' long, C-55 rooftop chain, electric drive, very good condition

3 strand transfer deck, 7' wide x 14' long, electric drive, C-55 rooftop chain, good working cond...

The Hudson Wide Bandmill is a high-performance sawmill designed for efficiency in cutting logs wi...

Mellott rosser head 36" debarker, electric drive on head, working condition

This used debarker with a hydraulic setup features a robust 180 HP 6-cylinder Deutz engine, altho...

This 2008 used Morbark Debarker is ideal for efficient and reliable debarking operations. The com...

The Lucas 6-16 Circular Swing-Blade Mill is a 2021 model that remains unused and in pristine cond...

The MDI Metal Detector, designed for sawmill applications, offers reliable performance with its a...

GS hyd. unit, 25 HP. electric drive, 2 pump sections, one is a pressure compensated, very good co...

40 hp electric, approx 150 gal capacity tank, PVR50 hyd pump, includes all valves attached, very ...

The HMC 36" Chain Log Turner is a reliable piece of equipment for sawmill operations, designed to...

Morbark vibrating conveyor, 17" pan, 30' long, includes drive but no power, good condition

The LT300 Wood-Mizer Thin Kerf Head Rig is a used band mill designed for efficient lumber cutting...

2 head Morgan resaw, electric drive, BRAND NEW guide rollers from DW bands, new feed/return belts...

Baker complete run-around system for grade resaw, electric powered, includes cab and all controls...

Edmiston log deck, 4 strands 12' wide x 34' long H-78 chain, stop-load, good working condition

Cleereman 3 head-block carriage 110 volt -over-air set-works, bottom dog flippers, working condition

Mellott log turner #7, hyd drive, good working condition

belt conveyor 20" wide x 20' long, hyd drive, working condition

barn sweep, Cornell style chain, hyd drive, pan is 36" wide x 18' long, working condition

Mellott rosser- head debarker, electric powered, includes and controls, includes barn sweep under...

Mellott vibrating conveyor, 19" wide pan, approx 4" tall sides x 135' long, electric drive, very ...

Mellott 3 strand log deck, 10' wide x 17' long, H-78 chain, electric Tulsa Winch drive, stop-load...

AMW dust blower, 60" dia housing, 24" inlet/ 18" x 21" outlet, 100 hp electric motor power, good ...

Roberts hammer mill/ waste grinder, 1/4" screen, top feed, 60 hp electric drive, 3600 rpm's, good...

Portable, 2 HB Power Receder, Right-hand (can be converted to 4HB), Hydraulic dogs and hydraulic ...

Right hand, 4 headblock, 16' carriage, 12v/hydraulic. Blades in good condition. Make your offer t...

200 gal vertical air tank, good condition

1 1/2" band sawmill, 16' cutting length, powered by a 23 HP Briggs gas engine. Fully manual opera...

Morbark 3-Knife Chipper System Equipped with a 100 HP electric motor powering the chipper and a ...

5.5" x 25" cutterhead with 3 stationary inserted tooth F-style blades. Includes 2 spare blades. C...

1997 Wood-Mizer LT40, equipped with a new 38 HP Kohler engine and debarker. All hydraulic with lo...

The Wolf Model; B-1600, SN; BBH0479, includes complete run-around system and all controls, uses 2...

30' long, 12" wide ladderback chain, electric gear box drive, 1 set of log kickers, good condition

Gentec 210 KW Generator 3 PH. Runs on LP or natural gas. In good condition. Make an OFFER today.

concave style belt conveyor, 30" wide x 27' long, electric drive, working condition

operator cab, approx 5'x5', comes with BRAND NEW glass, in good condition

MDI whole log metal detector, capacity is 30" wide x 28" tall, includes controls, very good condi...

18"W belt 22" opening 15' long 74" high, excellent condition

Turbo engine, rebuilt in 2022. In good condition — make your offer today!

F3L101, 35 HP engine. Rebuilt, with a good used clutch and Murphy controls — make your offer today!

24" x 20', In good condition, with sprocket drive. No belt included.

220 HP diesel engine with 1,000 hours, equipped with a WPT double-disc clutch. A good unit — make...

Cummins A180 HP – Less than 1,000 hours, Murphy shutdown, clutch, radiator, runs great. John Dee...

100 HP Power Unit w/ turbo, hour meter unknown. Includes clutch and is in good condition. Make yo...

L10, 10-liter, 275 HP engine. New bearings and rings, rebuilt head and injectors, rebuilt injecto...

This unit features a John Deere engine paired with a Kohler generator, 3 phase, 440V. It is in wo...

225KW Generator – Excellent Condition. 3 Phase / 338 Amps, 5487 Hours, 490 HP. Clean, powerful un...

140 HP Power Unit – 2,850 hours. New turbo installed, new clutch disc (Oct.), Murphy control pane...

40" blower with a 21 HP electric motor, all in very good condition. Make your offer today!

Horizontal feed machine, recently re-serviced with new anvils, bolts, and holders, plus a chute f...

85 HP aftercooled engine with very low hours. Equipped with new WPT clutch and Murphy controls. M...

John Deere engine paired with Kohler generator, 3-phase, 440V. In good working condition, only se...

100 HP power unit, hour meter unknown. Equipped with clutch. In good running condition. Make your...

6-paddle unit with 48" diameter and 16" inlets/outlets. Model 717, Style W63694. Powered by 20 HP...

Used for processing small wood pieces such as edging strips. Equipped with electric motor and in ...

Cresswood Grinder. In good working condition, well-maintained, and ready to use. Make your offer ...

8-Knife Stationary Wood Chipper. Heavy-duty chipper equipped with 8 knives. In excellent conditio...

Model: VMX Series, starter for 150 hp motor, working condition

3/4" x 8" cutter, 6' arm, hyd drive, good working condition

High-capacity waste grinder with 24" wide infeed belt, 125 HP electric drive. Well-maintained and...

The Morbark 950 Tub Grinder is a reliable choice for handling your grinding needs, equipped with ...

drop trimmer, 9 blades, up to 18' long capacity, air cylinders on heads, electric powered, price ...

9- head drop-saw trimmer, 24" dia blades, air cylinders on heads, electric powered, includes cont...

Brand New Whirlwind blowers in stock, 8" -14" inlet, AR-400 steel and Dodge bearings, heavy duty ...

Morgan Band Resaw, powered by a 27 HP Kohler engine. Comes with return belt, 25 used bands (not s...

Reckart drop belt, 24" wide x 13' long, air cylinder for up-down, hyd drive, good working condition

IAP dust blower, 24" dia inlet- 24" dia outlet, 150 hp electric drive, 18,000 cfm's very good con...

drop belt, approx 20" wide x 12' long, hyd drive, good working condition

Mellott log trough, ladder-back chain, includes air-powered kickers, hyd drive, very good condition

slab drag conveyor, 15' x 14', electric gearbox drive,81X chain with steel cleats bolted on, good...

slab drag waste conveyor, 10' 6" wide x 20' long, has steel slats to drag waste/ slabs, electric ...

Supreme Mfg lumber carts, 42" wide x 92" long, heavy duty casters, 4 stake pockets, includes 2 st...

24" W x 40' L roller conveyor with hydraulic 8" dia. rolls and spiral rollers, 16' length to the ...

Carriage drive, includes cable drum and hydraulic motor, good condition

4 head trim saw, up to 12' long capacity, electric powered, includes material and waste belts, pr...

several sections of fiberglass vibrating conveyor sections, various sizes, call with your needs, ...

Go-Fast double end trim saw, electric drive, 4" x 8' capacity, good working condition

manual seal-less strapping tool for metal banding, similar to Fromm, will do banding from 1/2" up...

Shutter grinder with screen and blower pipe system. 4" x 17" capacity with 1.75 screen and 55' bl...

Precision 5' x 5' shaker screen, 1-3/4" top screen, 3/4" bottom screen, includes cyclone and dual...

Features 20" opening with top feed and bottom discharge. Feed mechanism requires some electrical ...

Fughum shaker screen/ cyclone, 7' x7' screen, 5' dia cyclone, working condition

A1 Nicholson Ring Debarker 1978 model, 5-arm ring debarker. Complete unit (no cab). Reliable and...

Meadows 2 Blade Edger 2 x 20" wide cutting capacity with 1 stationary blade and 1 movable blade....

Montgomery waste grinder, 34" capacity, top-feed, includes feeding hopper, price includes going t...

Williams Hammer Mill 34" wide drum, powered by 100 HP 3-phase electric motor. SN#17053. In fair ...

roll case 24" wide x 20' long, 4 strand pop-up transfer, transfer goes both directions, hyd drive...