30" Cambio 5 arm ring debarker, electric drive, includes infeed/ outfeed log troughs and all cont...

Pro-Cut chop saw, up-cut style, 7" x9" cutting capacity, 22" dia blade, includes 8' infeed/outfee...

Linden step-feeder for logs, 16' long capacity, 15 hp electric powered hy unit, good working cond...

Hurdle 3 head-block circle mill, includes 4 blade Cedar Creek vertical edger, includes log deck, ...

Uninstalled and ready to load. In very good condition with 6,067 hours, featuring a 30 HP electri...

A Cat Forklift 8000 hours, 1500 lb. lifting capacity, 10' height capacity, 8' fork extension, and...

3 phase/480 volt, excellent condition

3 phase, 110V, will grind 24" - 30", will do alternate bevel, good condition

3 phase, 120V, fair condition

3 phase, good condition

Dry Kilns (cream), Conventional Heating System, 600,000 BTU Propane, single phase, 120V control v...

3 phase, good condition

3 phase, good condition.

Cleereman 3 head-block, 36" carriage, Timber Tiger electric set-works, includes track/ drive/ 60"...

Hyd unit, 10 hp electric powered, vane type pump, approc 25 gal capacity, includes several flow c...

2 strand green chain, 5' 6" wide x 32' long, gearbox drive, C-55 rooftop chain, good working cond...

Brewco edger, 4" thick x 20" wide capacity, powered by 2 separate electric motors, includes 16' l...

Air compressor

Hyd reservoir with oil cooler, approx 20 gal, good working condition

Armstrong band saw sharpener, electric drive

36" bar type Log Turner (Sawmill), all hyd, good working condition

10"x60' waste conveyor H78 chain with paddles, electric drive ,includes new chain

pin-on loader bucket, approx 2 1/2 yard capacity, also has fork pockets, good condition

Baker single head resaw, Model; BBR-O, Serial#; 04-3371, has tilting infeed belt w/ digital displ...

concave belt conveyor, 24" wide x 30' long, electric drive, good condition

waste conveyor used for chips, 18" wide paddles x 12' long, electric drive, heavy duty built and ...

Supreme Mfg lumber carts, 42" wide x 92" long, heavy duty casters, 4 stake pockets, includes 2 st...

air-lock 13" inlet/outlet, gear box drive, good condition

Helle cable drum unit for carriage drive, drum is 13 1/2" dia x 16" wide, hyd drive, good working...

9- head drop-saw trimmer, 24" dia blades, air cylinders on heads, electric powered, includes cont...

2 way chip diverter, good condition

36" dia chip blower, single chip loading chute, outlet 12" x 14", good working condition

48" dia blower, 17" inlet/ 16"outlet, 40 hp electric power, good condition

Mellott #5, 42" Log Turner (Sawmill), hyd drive, working condition

Meadows 36" chain type Log Turner (Sawmill), hyd drive, working condition

Ingersoll-Rand screw compressor, 50 hp electric power, approx 225 CFM, good operating condition Hours: 21864

Ingersol-Rand Pac-Air screw compressor, 125 hp electric motor, not tested but appears good Hours: 25346

Kaeser screw compressor, approx 15 hp, working condition

Hyd power unit, 15 hp electric power, vane type pump, includes 4 electric valves, approx 60 gal c...

Hyd power unit, 7 1/2 hp electric power, enclosed pump unit, includes large control panel, approx...

HMC AC-40 4 head-block carriage, Silva-Tech set-works with spare parts, air dogs, husk has 48" di...

Hyd power unit, 7 1/2 hp electric power, vane type pump, good condition

hyd reservoir, approx 35 gal capacity, good condition

Hyd unit, 15 hp electric motor, vane type pump, approx 80 gal capacity reservoir, good working co...

2 strand transfer deck, 50" wide x 40' long, electric drive, very good condition

hyd unit, 5 hp electric drive, pressure comp pump, cooling radiator, approx 30 gal capacity tank,...

hyd unit used on Fulghum rosser-head debarker, 15 hp electric drive, 2 stage vane type pump, appr...

Tyrone Berry carriage drive, cooling radiator, working condition

Tyrone Berry carriage drive, cooling radiator, no power

Tyrone-Berry feed, SMA-285 carriage feed, includes cable drum and hyd unit, good working condition

hyd unit, 10 hp electric drive, approx 160 gal tank, pressure comp pump, good working condition

Mellott rosser-head debarker, electric drive, hyd cylinder for head up-down, recently in producti...

Jeffrey vibrating conveyor, 18" wide pan x 36' long, 6" tall sides, electric drive, good working ...

Irvington-Moore 7 strand unscrambler, 75" tall, includes even-end rollers, electric drive, good w...

Industries PHL log length scragg mill, 48" dia. blades, electric drive, 2 slab drop belts, all el...

Morbark shaker screen for a 58" dia chipper, good working condition

Comact Maxi-Tour merchandising saw system, 72" dia blade, 75 hp electric drive, includes infeed/o...

30" dia Cambio ring debarker, 6 arms, steel infeed press wheels, all electric, all electrical and...

log trough 36" wide over-all 19' long, electric drive, good working condition

4 strand log deck, 13' wide x 21' long, electric drive, good condition

Fulghum 6 knife chipper, 60" dia, top discharge, working condition

Operator/ sawyer cab, 4'6" wide x 13' long x 7' tall, includes air-ride seat, good condition

Precision vibrating conveyor, 18" wide pan x 30' long, 12" tall sides, BRAND NEW fiberglass paddl...

2 strand transfer deck, 5' wide x 23' long, 81XH chain, BRAND NEW DRIVE SHAFT/ SPROCKETS, very go...

various chipper infeed spouts for vibrating conveyors, call with your needs, $450 each

2 strand transfer deck, 3' wide x 25' long, electric drive, 81X chain, good condition

manual seal-less strapping tool for metal banding, similar to Fromm, will do banding from 1/2" up...

40' long, 110 ladder-back chain, 14" wide, s- style drive, no power, good working condition

log trough 55' long, 12" pan width, electric drive, good working condition

Cleereman 3 head-block carriage, Silva-Tech computerized set-works, 48' long track/frame, incudes...

HMC HC-40, serial #330-1982, 4 head-block carriage, 110 volt electric over air set-works, 50 hp c...

3 strand 10' wide x 30' long green chain, Tulsa Winch drive, C-55 rooftop chain, heavy duty built...

3 strand 10' wide X 20' long log deck, Tulsa Winch electric drive, H-78 chain, heavy duty built, ...

4" x 30" wide capacity, 2 movable blades, includes BRAND NEW ARBOR, very good condition

Aerovent dust blower, 48" dia, 20" inlet- 18" outlet, electric drive, good condition

MDI metal detector, built for planer, includes all controls, LIKE NEW CONDITION!

Cornell style barn sweep drive, hyd drive, includes some chain, good condition

Mellott 24" wide pan x 50' long, 8" sides, includes sawdust section and chipper mouth, hyd drive,...

Honeyville bag house, includes filters, very good condition

Progress 24" wide pan x 35' long, 9" sides, good condition

Valone Kone ring debarker, electric drive, includes infeed/outfeed, working condition

Fast Line scragg mill, similar to "Big Jake", twin blades 56" dia, electric drive, includes off-b...

Morbark 628 debarker, electric drive, includes operator cab and all controls, very good condition

Koger-Air,14" dia inlet/outlet, electric drive, very good condition

several sections of fiberglass vibrating conveyor sections, various sizes, call with your needs, ...

3 strand transfer deck, 11' wide x 27'6" long, electric drive, 81X chain, good condition

Carriage drive, includes cable drum and hydraulic motor, good condition

Tyrone Berry SN: A2850, Model:SMA-225, spool of 3/4" steel cable, 60hp electric motor, hyd tank, ...

3 strand transfer deck, 11'6" wide x 28' long, electric drive, H-78 chain, good condition

20" wide x 20' long, 7" sides, electric drive, working condition

Hyd reservoir, approx 185 gal capacity tank, excellent condition

Jacobson AC/DC, control box w/250A, 600 VAC 460V transformer, 125hp electric motor w/blower motor

Fulghum, 18" wide x 14' long, 9" sides, good condition

Armstrong, Model #6 RH, electric drive, no clamp or stands

3" x 13" paddles, 16" pan, 15" sides, electric drive, 20" x 68' long, good condition

Armstrong, Model #6 RH, SN: 16154, electric drive, includes extra grinding wheels and all clamps ...

Syncro Shear,SN:C2521-1, balanced vibrating conveyor, electric drive, 20" pan x 47' long, 14" tal...

15" ladder back chain, 24" pan, 16" sides, 32" x 53' electric drive, good condition

4 strand, 33" slats on each strand, electric drive, unit is 80" tall, good condition

Model:36EZTD, SN: 42, 5" x 21' tailing belt outfeed, 38" x 9' infeed rolls, 6" x 36" infeed cap, ...

5 strand, 13' wide x 18' 6" long, H78 chain, electric drive, air cylinders on pop up board stop, ...

75hp electric, double pilot pump, directional valve

50"x 22' overall, air cylinder log clamp down, electric drive, WR124 chain w/cleats, air cylinder...

6" x 42" capacity, MN: HE42, SN: 703-10-81, single arbor, (4) 19" saws, 2 movable blades, 8' infe...

36" wide x 28' long, steel slat conveyor for slabs etc., very good condition

30 HP electric motor w/double pump direct mounter, approx. 100 gal tank, lots of electric control...

Beloit ring type debarker, electric drive, working condition

5' x 6' cab, good condition

Tyrone SMA-270, 125hp electric drive, includes hyd unit and cable drum, good condition

Honeyville Metal baghouse is approx. 8' x 8', 72 - 5" x 60" bags, 11" x 13" inlet, 28" x 63" bott...

pressure comp pump, has reservoir and cooling radiator

Corley gang edger, 8" capacity, includes infeed/outfeed, electric drive, THIS UNIT NEEDS TO BE RE...

chain is 11" wide , trough is 38' long, electric gear box drive, 1 set of kickers, heavy duty and...

SHOWCASE REBUILT! Baker 5 head resaw, electric drive, includes return belt and 1 turn table, PRIC...

ladderback chain,18" wide pan x 33' long, 12" sides, electric gear box drive, was used on incline...

HMC Model; 1DC, AC carriage drive, complete unit ready to work

Cleereman 3 head-block, 141" knees, Model;36, SN; 115, air set-works, includes 56' of track-frame...

15 hp, electric powered, vane type pump, very good condition

30 hp electric drive, approx 70 gal horizontal tank, good condition

6" capacity gang edger, gang side is 16" wide- edger side is 28" wide, this unit will be "SHOWCAS...

90" wide x 28' long, electric drive, heavy duty and in good condition

rosser head, slant track, working condition

carriage track/ frame for HMC model; AC-40 carriage, good condition

Sullair air dryer, 500CFM, 3 phase, 460 volts, refrigerant type, excellent condition

Multi - head trimmer, 7 saws, 6" capacity up to 20' long, electric drive, good condition

40" dia. 30 HP. electric drive, good condition

electric drive, various sizes, good condition prices vary from $2000 - $4000.

4 strand, 10' wide x 22' long, H-78 chain, good condition

66" dia. 6 knife, side/ rear discharge, good working condition

7 strand, 12 1/2' wide x 7' long, 81X chain, electric drive , good condition

48" dia. 6 knife wheel with 3 blocked, bottom discharge, good condition

rosserhead style, in working condition

8'X 8' screen, electric drive, working condition, CALL FOR REBUILDING OPTIONS

rosser head style, all hyd. drive, 36" dia. log capacity x 12' long, very good condition

27" 6 arm, includes lots of new parts, Good Working Condition, price includes some installation c...

Rosser head, slant track, hyd. drive on the head, in working condition, CALL FOR REBUILDING OPTIO...

6', top wheel is 1 1/2" thick, steel slat off-bearing belt, air-strain, this unit is in good work...

6"x42" wide overall, includes infeed and outfeed rollers, working condition

6', top wheel is 1" thick, air strain, was used for a line-bar resaw, good working condition

15 HP. electric drive, 2 pumps, several electric valves, good working condition

5 HP. electric motor, has cooling radiator, tank heater, good working condition

30 in. dia. 15 HP. electric motor, includes mounting plate and pipe, VERY GOOD CONDITION

Slab drop belt, 24" wide x 12' long, electric drive, hyd cylinder for drop belt, includes hyd uni...

48" 6 knife chip-pac, includes 5' x5' shaker screen, electric drive, includes soft start, numerou...

"Hochstetler" band resaw, 12" x12" x 12' long capacity, 2" x 30" band wheels, line-shaft ready, f...

36" chain type log turner, hyd drive, good working condition

drop belt, approx 20" wide x 12' long, hyd drive, good working condition

Hyd reservoir approx 118 gal capacity, very good condition

Log deck, 3 strands, 12' wide x 23' long, H-78 chain, electric drive, working condition

Fughum shaker screen/ cyclone, 7' x7' screen, 5' dia cyclone, working condition

belt conveyor approx 16" wide x 15' long, 6" tall sides, electric drive, good working condition

Volvo L-90C wheel loader, 20,567 hrs., includes log clamp attachment, has quick-attach, working c...

Volvo wheel loader bucket, 2 yard capacity, good condition

IAP dust blower, 24" dia inlet- 24" dia outlet, 150 hp electric drive, 18,000 cfm's very good con...

drop trimmer, 9 blades, up to 18' long capacity, air cylinders on heads, electric powered, price ...

Roll case/ transfer deck, rolls are 30" wide x 38' long total length, transfer is 52" wide and 38...

Fulghum 48" dia chipper, 3 knives, 150 hp electric drive, 5' x5' shaker screen-electric drive, ch...

cleated belt conveyor, 24" wide x 18' long, set up for incline, electric drive, excellent condition

Progress waste grinder, swinging hammer style, 125 hp electric drive, 1185 rpm's, unit needs to h...

Mellott rosser-head debarker, your choice of power (electric or hyd), new babbit in bearings, new...

splitter saw, designed to split cants, boards, etc., 50hp electric drive, 81x chain, 40" dia inse...

2 strand transfer deck, 28" wide x 14' long, #80 roller chain, no drive, good condition

HMC 4 head-block circle mill, complete mill package, includes husk w/ top saw, carriage drive, op...

rollcase, pop-up rollers, perfect for putting in a transfer deck, 16" wide x 7' long, foot pedal ...

Tyrone-Berry carriage drive, includes valve for sawyer, good working condition

chain type log turner, 36" chain, hyd drive, good working condition

slab drag, 15' x 15', electric gearbox drive, 81X chain with steel cleats bolted on, good working...

chain type log turner, sized for 40" carriage, hyd drive, good working condition

Precision vibrating conveyor, 18" wide pan x 55' long, 8" sides, electric drive, good working con...

Webster vibrating conveyor, 18" wide pan x 20' long, electric drive, good working condition

Meadows board edger, 4" thick x 36" wide capacity, infeed rollers, outfeed is a tilt table, line-...

Smicksburg vertical band head-rig, line-shaft ready, includes skid of spare parts and is ready fo...

Brewco single head resaw, line-shaft ready, working condition

Patz style chain barn sweep, hyd drive, 6' flat section, 50' incline section, paddles are 17" lon...

Reckart cant catcher for drop use with a drop belt, air powered, 4 arms, travel is 30", good work...

Reckart drop belt, 24" wide x 13' long, air cylinder for up-down, hyd drive, good working condition

heavy duty transfer deck, 5 strands, 14' wide x 12' long ,electric drive, H-78 chains, very good ...

5 strand heavy duty deck, 12' 6" wide x 25' long, electric drive, H-78 chain, very good condition

Helle 2 blade vertical edger, 22" dia blade, 40 hp electric drive, price includes going through s...

dust auger 12' long- 4" dia auger, electric/ gearbox drive, good condition

roll case 30" wide x 16' long, rolls have spirals, electric drive, good condition

4 strand transfer deck, #80 roller chain, electric drive, good working condition

Quincy screw compressor, Model; QSI245ANA31A, Serial #; 94877, 50 hp electric power, 69,848 hrs, ...

bar type log turner, used with 42" carriage, hyd drive, good working condition

Lots of vibrating conveyors in stock, up to 36" wide pans, hyd drives, electric drives, call with...

Lots of hyd units in stock, vane type pumps, pressure comp pumps, various sizes from 5hp -50-hp, ...

Corley 3 head-block circle mill, DY turbo- turners, Accura-Set set-works, air over air, almost hy...

Helle 3 head block, 36" carriage with 124" knees, husk with top saw, 60' long track, frame, 60 hp...

roll case 24" wide x 15' long, 8" dia rolls, good working condition

6 strand deck, H-78 rooftop chains, electric drive, 14' wide x 27' long, very good condition

Cleereman circle saw husk, for left hand carriage, includes 56" dia blade in good condition, off-...

Belt conveyor 24" wide x 30' long, electric drive, good working condition

8' x 8' screen, electric drive, good condition

rollcase/ pop-up transfer, 30" wide x 13' long, 3 strand transfer, hyd and electric drive, has ca...

36" chain turner, hyd drive, good condition

green chain, 3 strand, 9'6" wide x 101' long, electric drive, 8X chain, good condition

Precision rosser head debarker, 36" capacity, electric drive on head, self-contained hyd unit for...

4 strand transfer deck, 10' wide x 11' long, 5 hp electric gear-box S style drive, 81X chain, hea...

vertical edger, 2 split blades, 40 hp electric powered, good working condition

circle saw husk, fits 56" dia blade, includes off-bearing belt, good working condition

live roll case 24" wide x 15' long, electric drive, 6 1/2" dia rolls, good working condition

PHL Industries 48" dia chipper, 6 knife wheel with 3 blocked, includes some spare knives, good wo...

Helle 4 headblock carriage, complete package includes track-frame, husk, controls, carriage drive...

Precision vibrating conveyor, 18" wide pan x 27' long, 10" tall sides, electric drive, good worki...

Precision vibrating conveyor, 18" wide pan x 20' long, 10" tall sides, electric drive, good worki...

drop belt 24" wide x 11' long, electric drive, air cylinder for up-down movement, good working co...

Precision 6 knife chipper and chip-pac, includes Precision 6' x6' shaker screen and cyclone, pric...

slab drag waste conveyor, 10' 6" wide x 20' long, has steel slats to drag waste/ slabs, electric ...

48" dia chipper, 6 knives, includes several sets of spare knives, good working condition

3 strand transfer deck, 7' wide x 11' long, lineshaft ready, good working condition

roll case, 30" wide x 21' long, 8" dia rolls, this unit is heavy duty and in very good condition

Precision 58" dia, 6 knife, hard surfaced anvils, Kwik-Change knife system, THIS UNIT IS BRAND NE...

Mellott #6 chain type 48" Log Turner (Sawmill), all hyd, working condition

Supreme Mfg rollcase 20" wide x 20' long, 6" dia rolls, 1 7/16" dia shafts, electric drive, BRAND...

slab drop belt, 24" wide x 10' long, built for left-hand mill, air cylinder for up-down motion, g...

Eagle Claw saw bits, 9/32", these are comparable to the Simonds dominator, call if you have any q...

Webster vibrating conveyor, 18" wide pan x 25' long, electric drive, includes chipper feed spout,...

chip loading system with dual load-out chutes, good working condition

hyd power unit, 40 hp electric, vane type pump, includes cooling radiator, approx. 120 gallon cap...

Precision 5' x 5' shaker screen, 1-3/4" top screen, 3/4" bottom screen, includes cyclone and dual...

Brand New Whirlwind blowers in stock, 8" -14" inlet, AR-400 steel and Dodge bearings, heavy duty ...

Reckart barn sweep, 40" wide x 6' flat x 20' incline sections, electric drive, working condition

Cornell edger 6" thick x 36' wide capacity, 1 stationary-2 movable blades, air-powered hold-downs...

slab drag conveyor, 15' x 14', electric gearbox drive,81X chain with steel cleats bolted on, good...

buck saw with log bunk, hyd drive good working condition

Precision vibrating conveoyr, 30" wide pan x 58' long, 12" tall sides, hyd drive, excellent condi...

Froedge 6' lumber stacker, turning fork LH, built for stacking green lumber, includes all transfe...

slab drop belt, 34" wide x 12' long, hyd drive, hyd cylinder for up-down movement, brand new and ...

belt conveyor 12" wide x 16' long, working condition

Morbark 6- knife 58" dia chipper, includes 6' x 6' shaker screen and cyclone, good operating cond...

24"dia Reckart chip blower and dual loadout chutes, no power, good operating condition

chip cyclone, was used with 6' screen, good working condition

10 hp hydraulic power pack, 40 gal. tank, pump Model PVR15-15B15-RF-0-5-A-1, good condition

5' X 5' screen, electric drive, very good working condition

Grapple forks 73" wide overall, pin-on style, 40" center to center on bottom pins, 2-1/4" pins, g...

20 hp electric drive hyd power unit, gear style pump, approx 40 gal reservoir, includes control p...

Morbark 640 debark complete line, includes infeed/ outfeed troughs, operating cab and all control...

36" dia dust blower, 18" inlet/ 16" outlet, good condition

The Brewer Scragg Mill is a used sawmill designed for efficient processing of short logs, handlin...

Newman K-20 double end trim, 22" blades, electric drive, 16' long capacity, good condition

Twin City blower fan, 5 hp electric drive, 19" inlet 14 1/2" x 19" outlet, good working condition

roll case 24" wide x 20' long, 2 strand pop-up transfer, transfer goes both directions, hyd drive...

3 strand transfer deck, 8' wide x 7' long , hyd drive, good working condition

The Wolf Model; B-1600, SN; BBH0479, includes complete run-around system and all controls, this u...

The Corley Gang Edger is a reliable choice for sawmill operations seeking efficient lumber proces...

belt conveyor 38" wide x 17' long, electric drive, approx 5" tall sides, heavy duty and in good c...

barn sweep waste conveyor, approx 10' flat section x 50' long incline section, includes 90 degree...

4 strand transfer deck, approx 9' wide x 8' long, H-78 rooftop chain, electric drive, good condition

babbit melting pot with work bench that has vice mounted to table, working condition

belt conveyor 24" wide x 9' long, approx 4" tall sides, electric drive, has 2 pinch rollers on dr...

Jeffrey waste grinder, 34" wide capacity, top feed/ bottom discharge, includes new set of hammers...

cant bunks, dead rollers, approx 8' wide x 15' long, good condition, 2 available, price is per piece

Meadows 4 headblock carriage, Model; #3 DELUXE, 43" center to center wheels, 110 volt over air so...

Model: 8X8 screen, 1-1/4" screen, SN: FIR-953, good condition

Webster vibrating conveyor, 24" wide pan 9" tall sides, 80' long, electric drive, very good condi...

The 30" Heavy Duty Edger is a used sawmill machine designed for efficient board edging. It comes ...

The complete Morbark debarker setup offered includes essential components for efficient log proce...

This used Helle Circular Mill setup is equipped with a 3 HB, 4 Axle Carriage System and offers a ...

The A1 Nicholson Debarker, a 1978 model, is a sturdy piece of lumber processing equipment, known ...

Patz barn sweep drive and barrel of paddles, use for parts

rll case, 18" wide x 25' long, heavy duty and in very good condition

4 strand transfer deck with even-ender rolls, approx 8' wide x 8' long, electric drive, good work...

belt conveyor, 60" wide x 50' long ,electric drive, no sides, good working condition

Cleereman 4 head block , Model 40, air over air setworks, includes cab/track-frame/ carriage driv...

3 strand green chain, 7' wide x 54' long, C-55 rooftop chain, electric drive, very good condition

3 strand transfer deck, 7' wide x 14' long, electric drive, C-55 rooftop chain, good working cond...

Mellott rosser head 36" debarker, electric drive on head, working condition

1997 Wood-Mizer LT40, equipped with a new 38 HP Kohler engine and debarker. All hydraulic with lo...

The Hudson Wide Bandmill is a high-performance sawmill designed for efficiency in cutting logs wi...

This 2008 used Morbark Debarker is ideal for efficient and reliable debarking operations. The com...

The MDI Metal Detector, designed for sawmill applications, offers reliable performance with its a...

The Lucas 6-16 Circular Swing-Blade Mill is a 2021 model that remains unused and in pristine cond...

This used debarker with a hydraulic setup features a robust 180 HP 6-cylinder Deutz engine, altho...

GS hyd. unit, 25 HP. electric drive, 2 pump sections, one is a pressure compensated, very good co...

40 hp electric, approx 150 gal capacity tank, PVR50 hyd pump, includes all valves attached, very ...

This used 24"W x 40' Long Rollcase is a robust conveyor system that is ideal for sawmill operatio...

The HMC 36" Chain Log Turner is a reliable piece of equipment for sawmill operations, designed to...

Morbark vibrating conveyor, 17" pan, 30' long, includes drive but no power, good condition

The LT300 Wood-Mizer Thin Kerf Head Rig is a used band mill designed for efficient lumber cutting...

2 head Morgan resaw, electric drive, BRAND NEW guide rollers from DW bands, new feed/return belts...

Baker complete run-around system for grade resaw, electric powered, includes cab and all controls...

Mellott log turner #7, hyd drive, good working condition

Edmiston log deck, 4 strands 12' wide x 34' long H-78 chain, stop-load, good working condition

belt conveyor 20" wide x 20' long, hyd drive, working condition

Cleereman 3 head-block carriage 110 volt -over-air set-works, bottom dog flippers, working condition

barn sweep, Cornell style chain, hyd drive, pan is 36" wide x 18' long, working condition

Montgomery waste grinder, 34" capacity, top-feed, includes feeding hopper, price includes going t...

concave style belt conveyor, 30" wide x 27' long, electric drive, working condition

Mellott rosser- head debarker, electric powered, includes and controls, includes barn sweep under...

Mellott log trough, ladder-back chain, includes air-powered kickers, hyd drive, very good condition

Mellott 3 strand log deck, 10' wide x 17' long, H-78 chain, electric Tulsa Winch drive, stop-load...

Mellott vibrating conveyor, 19" wide pan, approx 4" tall sides x 135' long, electric drive, very ...

AMW dust blower, 60" dia housing, 24" inlet/ 18" x 21" outlet, 100 hp electric motor power, good ...

Roberts hammer mill/ waste grinder, 1/4" screen, top feed, 60 hp electric drive, 3600 rpm's, good...

Right hand, 4 headblock, 16' carriage, 12v/hydraulic. Blades in good condition. Make your offer t...

Portable, 2 HB Power Receder, Right-hand (can be converted to 4HB), Hydraulic dogs and hydraulic ...

200 gal vertical air tank, good condition

1 1/2" band sawmill, 16' cutting length, powered by a 23 HP Briggs gas engine. Fully manual opera...

Morgan Band Resaw, powered by a 27 HP Kohler engine. Comes with return belt, 25 used bands (not s...

Morbark 3-Knife Chipper System Equipped with a 100 HP electric motor powering the chipper and a ...

5.5" x 25" cutterhead with 3 stationary inserted tooth F-style blades. Includes 2 spare blades. C...