2007 TimberKing 1600 - Hydraulic log loader, new hydraulic hoses - Kohler 25 HP gas engine with a...

Cleereman Complete Circular Mill - Cleereman Left Handset model 36 - 3 Headblocks - Silvatech com...

Sawmill bed with chainsaw bar head. No motor. 20 ft bed and 53" chainsaw bar head. Can cut horizo...

2006 Wood-Mizer LT40 Super Hydraulic - 51 HP CAT Engine - 6300 Hours - Debarker - Lube Mizer - Ac...

includes carriage track & frame, AC carriage drive, Mellott Operator cab, electric setworks, this...

30' L, hyd drive, 17" pan, 4" sides, good condition

Mellott roll case 30" wide x 18' long, rolls are 8" dia, heavy duty and in excellent condition

8"x20" wide capacity, set up with stationary blades, 50 hp. electric drive, includes infeed rolle...

2 blades, hyd. cylinder for blade movement, in good condition

Morgan single arbor gang saw, capacity 12" wide x 5 1/2" thick, 100 hp electric drive on arbor, f...

Cresswood style, 4" thick x 32" wide capacity, electric drive on feed rolls, complete unit ready ...

Precision 58" dia chipper, 6 knives w/ 3 blocked, before and after pics, COMPLETELY REBUILT AND C...

36" dia dust blower, 20 hp electric powered, 14" inlet- 12"x15" outlet, excellent condition

Precision 48" dia chipper, 6 knife- 3 are blocked, top discharge, working condition

circe saw husk, 56" dia blade, includes Tyrone Berry carriage drive, good working condition

Baker deduster, 8" wide capacity, electric drive, includes new brushes, excellent condition

belt conveyor 20" wide x 22' long, no drive, good working condition

CM&E 48" dia, 8 knife chipper, working condition but shows considerable wear, should be rebuilt, ...

Belt conveyor 24" wide x 18' long, approx 7" tall slanted sides, hyd drive, excellent condition

Belt conveyor 4" wide x 15' long, approx 4" tall sides, electric drive, good working condition

2 strand transfer deck, 5' wide x 12' long x 47" high, H-78 chain, electric drive, board/ cant st...

Roll case, 24" wide x 19'6" long, 4 1/2" dia rollers, hyd drive, includes self-contained hyd unit...

4 strand transfer deck, 12' 6" wide x 4' long, C-55 rooftop chain, hyd drive, good condition

belt conveyor, 10" wide x 9' long, no drive, includes very good belting, sides are concave style

Webster vibrating conveyor drive section, 24" wide pan x 10' long, good working condition

Morbark waste grinder, horizontal feed, set up for line-shaft power, includes drag chain for prod...

Reckart 36" chain type turner, all hyd powered, excellent condition

Morgan double end trim saw, Serial # 062800311, minimum 20", max. 60" wide capacity, electric dri...

16" wide x 9' incline belt conveyor approx. 4" tall sides, electric drive, excellent condition

Newman 4 knife sharpener, all automatic, electric powered, good working condition

belt conveyor 12" wide x 6' long, approx 4" tall sides, good condition

light duty roll case 52" wide x 60" long, electric drive, 2 1/2" dia rolls, working condition

roll case 30" wide x 17' long, heavy duty and in very good condition

roll case 31" wide x 14' long, Heavy duty, working condition

waste conveyor used for chips, 18" wide paddles x 58' long, electric drive, heavy duty built and ...

3 strand green chain, 9'6" wide x 40' long, C-55B rooftop chain, good working condition

chip drag, 18" wide paddles x 35' long, heavy duty built, excellent condition

Waste conveyor, 24" wide pan x 73' long, electric drive, ladder-back chain, working condition

Koger dust blower, 38" dia, top discharge, 18" inlet/ 16" outlet, good condition

SMC air dryer, single phase 220 volts, air flow; 5200 l/min, working condition

Hyd power unit, 30 hp electric power, pressure comp pump, approx 50 gal capacity, good condition

hydraulic reservoir, 32" wide x 56" long x 30" high x approx. 175 gal capacity, good condition

roll case with transfer, 24" wide x 12' long roll case, 3 strand pop-up transfer deck 10' 6" wide...

Miner 3 blade vertical edger, 50 hp electric drive, self-contained hyd unit, includes various spa...

hyd unit, 20 hp electric drive, pressure comp pump, approx 80 gal tank, good condition

4 strand green chain, 7" 6" wide x 53' long, 81X chain, electric drive, good condition

4 strand transfer deck, 10' wide x 26' long, 81XH chain, electric drive, good condition

roll case 24" wide x 20' long, 7" dia rolls, no drive, good condition

Morbark 48" dia 3 knife chipper, Fulghum 5' x5' shaker screen w/ cyclone, electric drive on shake...

26" HD top feed waste grinder, bottom discharge, price includes all new teeth and anvils, excelle...

roll case 20" wide x 13' long, heavy duty 6" dia rollers, dead rollers, good condition

Meadows 4" x 36" capacity edger, infeed/outfeed, 2 movable blades, includes 2 Brand New blades, t...

SN: 36-307, MN: 36, 3 head block, air dogs, tapers, setworks, 16' long, 50" wide center to center...

16" dia, electric drive, good condition, 3 available

3 blades, 2 movable, 50hp electric drive, 6" capacity, good condition

18" wide x 18' long, hyd drive, approx 4" sides, good condition

Showcase Rebuilt! Hurdle 3 head-block carriage, includes complete mill package, track/frame/ driv...

rotary 230 volt, 25 HP phase converter, excellent condition

Morris 6 strand, 14' long, electric drive, good working condition

waste grinder, 24" wide infeed belt, 125 hp electric drive, good working condition

with a 15 HP electric drive, VERY good condition

Model #7, RC160 chain, 48 in. Hyd. drive, GOOD CONDITION

Roll case, 30" wide x 41' long, has several sections of spirals and several stops, very good cond...

Carrier vibrating conveyor, 24" wide pan x 50' long, 12" tall sides, electric drive, very good co...

belt conveyor 24" wide x 40' long, no sides, good working condition

24" x 24' long section, Jeffery vibrating conveyor, drive section included, working condition

2019 Accu-Cut edger, 6" x 40" capacity, 3 blades- 1 movable set, variable speed in-feed, includes...

chop saw for cants, 7" thick x 12 "wide capacity, 18" wide x 14' long infeed, 18" wide x 10' long...

Brewco 2 head resaw with complete run-around system, electric/ hyd powered, good working condition

spiral roll case approx. 24" wide x 18' long, electric drive, good condition

pan is 18" wide x 9" tall sides, 65' long, includes sawdust section, electric drive, good working...

Shop built gang saw with variable speed feed, 6" wide x 6" thick capacity, line-shaft ready, incl...

Morgan double end trim saw, 6" thick x 68" long capacity, line-shaft ready, feed is hyd driven, g...

Mellott #8 log chain type log turner, RC140 chain and #80 drive chain, hyd. drive, good working c...

belt conveyor, 24" wide x 6' long, good condition

Keystone gang saw, 6" thick x 12" wide capacity, single arbor, indexable sizer head, electric pow...

2 strand transfer/ cant bunk, transfer deck has 2 pop-up arms 56" long for roll-case, 10' long de...

belt conveyor 24" wide x 50' long, approx 4" tall sides, electric drive, good working condition

belt conveyor 18" wide x 6' long, hyd drive, approx 4" tall sides, very good condition

log deck, 3 strands 12' wide x 25' long, electric drive, H-78 chain, includes stop-load and 5' lo...

Newman chipper knife sharpener, holds up to 8 knives, single phase 220 volt electric drive, semi-...

Mellott roll case 24" wide x 15' long, no power, very good condition

Cornell gang edger, 6" thick capacity, edger side is 21" wide- gang side is 16" wide, 1 movable b...

Corley double end trim saw, 8" thick capacity, electric drive, good working condition

Reckart 4 strand transfer deck, 10' wide x 16' long, C-55 rooftop chain, electric drive, very goo...

Webster vibrating conveyor, 18" wide x 25' long, electric drive, good condition

Baker PAQ-O band resaw, 6" wide capacity, line-shaft ready, good working condition

Cornell style 24" dia blower, 10" inlet- 8" outlet, good condition

Brewco Speed-Cut chop saw, 15 hp electric power, 20" dia blade, air operated controls, good worki...

Northtech up-cut chop saw, 15 hp electric motor, 24" dia blade, air operated controls, excellent ...

Roll-case/ transfer, 36" wide x 21' long, has 3-way sorting, tipple arms for both sides, air oper...

Fulghum 48" dia, 6 knife chipper, recently in production, working condition

belt conveyor, 8" wide x 32' long, 1 1/2" tall sides, heavy duty and in very good condition, 2 av...

belt conveyor, 16" wide x 32' long, electric drive, 1 1/2" tall sides, heavy duty and in very goo...

belt conveyor, 30" wide x 9' long, hyd drive, good condition

2 strand transfer deck, 32" wide x 10' 6" long, working condition

5 strand transfer deck, 10' 6" wide x 9' 6" long, 81X chain, electric gearbox drive, has air oper...

5 strand Mellott unscrambler, electric drive, 81X chain with lugs, 10' 6" wide x 59" tall, excell...

Miner edger, 4" thick x 24" wide capacity, 1 stationary, 2 movabe blades, 5' infeed, 8' outfeed, ...

belt conveyor, 2 sections, 24" wide x 25' long, one section is hyd drive the other section is ele...

dust blower, 50" dia, 18"inlet/outlet, 40 hp electric motor for power, good working condition

Montgomery 34" hog, horizonal feed, bottom discharge, includes 100 hp electric motor, includes BR...

HMC drop belt, 24" wide belt x 13' long, air lift cylinder, good working condition

FIFO unscrambler, 6 strands, 13' 6" wide x 70" tall, electric drive, board singulator, very good ...

Mellott #7 log turner, hyd drive, good working condition

roll case, 24" wide x 16' long, hyd/ gearbox drive, some rolls have spirals, air powered pop-up s...

live roll case, 24" wide x 27' long, 2-way cant kickers, kickers are air powered, very good condi...

5 strand unscrambler, electric drive, approx. 52" tall, good working condition

5 strand green chain, 11' wide x 65' long, electric gear-box drive, C-55 rooftop chain, excellent...

4 strand transfer deck, 10' wide x 14' long, H-78 chain, gear box drive, good working condition

48" dia dust blower, 18" inlet/ 15" outlet, good condition

belt conveyor 24" wide x 18' long, no power, excellent condition

5 strand, 7' tall x 13' wide, working condition

Cooks edger, 6" thick x 36" wide capacity, 2 movable blades, set up for tailing belt, hyd drive, ...

roll case, 50" wide x 22' long, 9" roller dia, each rollers has it's own hyd motor, heavy duty an...

roll case 24" wide x 14' long, 11" dia rolls, good working condition

4 strand transfer deck, 10' wide x 18' long, #100 roller chain, electric drive, good working cond...

4 strand transfer deck, 10' 6" wide x 15' long, 52" tall, 81X chain, good condition

roll case, 24" wide x 43' long, electric drive, comes in 2 sections, includes spiral section and ...

belt conveyor 11" wide x 37' long, approx. 4" tall sides, no power, excellent condition

concave belt conveyor, 36" wide x 30' long, electric gear box drive, good working condition

4 strand transfer deck, 10' 6" x 10' long, H-78 rooftop chain, electric gearbox drive, has board ...

Cornell 4" thick x 27" wide capacity, 1 stationary-1 movable blade, includes infeed, this edger i...

Mellott 24" wide pan x 62' long, sawdust screen section, 8" tall sides, electric drive, good work...

Continental hyd power unit, 5 hp electric drive, pressure comp pump, approx 10 gal reservoir, goo...

belt conveyor 22" wide x 9' long, was used as off-bearing belt, working condition

Cornell edger, 36" wide x 6" thick capacity, 40 hp electric motor powered, includes infeed roller...

Hyd drive for sawmill carriage, good working condition

Morgan chop saw, line shaft ready, 22" dia blade, includes 1 extra blade 10' infeed/5' outfeed, g...

Morbark 58" dia 3 knife chipper, good working condition, includes 2 sets of knives

Mellott shaker table, 16' wide x 6' long, hyd drive, excellent condition

4 strand log deck, tulsa winch drive

4 strand unscrambler, built for pallet cut-stock, adjustable length, electric drive, excellent co...

The Timber King B20 Bandmill is a fully hydraulic sawmill designed for efficiency and precision. ...

24" wide x 68' long belt conveyor, approx 6" tall sides, electric drive, good condition

roll case/ transfer deck, rolls are 30" wide x 18' 6" long, has side-transfer chains, working con...

Whirlwind blower 10" inlet/8"outlet, AR-400 steel for fan and housing, very good condition

Cornell double arbor gang saw, 6" thick x 24" wide capacity, 2- 100 hp electric motors for arbors...

Cornell single arbor gang saw, 4" thick x 24" wide capacity, would work well for stringers, comes...

3 strand transfer deck & unscrambler, deck is 8' wide x 13' long, both are gearbox drive, good co...

concave belt, 24" wide x 40' long, hyd drive, includes all new rollers in belt, excellent condition

Morbark chip blower, approx 36" dia, electric drive, comes with single loading pipe, excellent co...

4'x5'

Challenger waste grinder, 200 hp electric drive, 51" wide capacity, 1-1/2" screen, good condition...

Webster 24" wide pan x 35' long, 10" sides, electric drive, good condition

4 strand green chain, 7' 6" wide x 18' long, C-55 rooftop chain, includes BRAND NEW DRIVE SHAFT/ ...

150hp, 1775rpm, 4445T frame, working condition

Mellott vibrating conveyor, 24" wide pan, 8" tall sides, electric drive, chipper spout, very good...

4 strand transfer deck, 10' x 10', H-78 rooftop chain, hyd drive, air powered board stops, good c...

barn sweep, total 80' long-all flat, electric drive, working condition

transfer/ log deck, 3 strands, 8' wide x 20' long, H-78 chains, working condition

6" x 36" Crosby board edger, includes tailing belt, good condition

5 strand green chain, 11' wide x 21' long, electric gear-box drive, C-55 rooftop chain, drive sha...

approx. 140 gal hyd reservoir, pressure comp pump, 30 hp electric drive motor, working condition

Whirlwind 12" air-lock, electric drive, this unit is BRAND-NEW

7 1/2 HP. electric motor, 200 gal. vertical tank, good condition

8' wide x 17' long capacity, electric drive, complete unit ready to go

HMC debarker, price includes a total Showcase Rebuilt machine.

Sering HD36 bar type log turner (36" stroke), needs vertical cylinder, top roller, and bottom tooth

26" wide x 95' long, approx 6" sides, electric drive, good condition

roll case 24" wide x 25' long, hyd drive, good working condition

Shutte Buffalo waste grinder, horizontal feed 18" wide, includes blower on side, includes 1-1/2",...

This used 3 Blade Meadows Edger by Meadows Mills is a reliable piece of equipment ideal for sawmi...

The 2 Strand Live Deck by Meadows is a robust and efficient component for sawmill operations. Thi...

sections of dead rollers, 10' long, 3- 21" wide available, 2" rollers - 3" center to center, exce...

This used sawmill setup includes several key components for efficient milling operations. The set...

Heavy duty, all hyd., 4 strand, 10' x 26' long, hyd. controls included. 7 years old and in very g...

saw sharpener for circle blades, up to 36" dia blades, electric drive, working condition

The Accu-Cut Edger is an efficient and reliable machine designed specifically for sawmill operati...

It has the hydraulic lift (It does need the control panel)

The Bill Turner Sawmill is a used band mill designed for efficient lumber processing and is parti...

The Precision Debarker is a used piece of sawmill equipment, expertly rebuilt in 2021 by Showcase...

The S & W 2 Blade Edger is a robust and efficient sawmill tool, ideal for board edging tasks. It ...

With a 12' infeed. 125 hp electric motor, low hour machine, makes nice mulch.

The 2 Head Go-Fast Band Resaw is a reliable piece of equipment designed for efficient wood proces...

Shutte - Buffalo waste grinder, 18" wide, top feed, 3600 rpm's, includes numerous spare parts, go...

transfer deck, 4 strands, 3' wide x 4' 6' long, H-78 rooftop chain, no drive ,excellent condition

2 head-block Renco circle mill, includes BRAND NEW FRICK DOGS, TAPERS AND SET-WORKS, includes fri...

3 strand log deck, 10' wide x 17' 6 " long, H-78 chain, hyd Tulsa Winch drive, stop-load arms, go...

Mellott 4 strand transfer deck, is currently 5' long, price includes custom length up to 20' long...

live roll case, 32" wide x 15' long, rolls are 6 1/2" dia, good working condition

LH, 4 HB, opens to 36 in, carriage is 20 ft. in length, electric setworks, includes track/frame, ...

The LT40 Wide Wood-Mizer is a portable bandmill ideal for those in need of efficient lumber proce...

3 strand transfer deck, 10' wide x 18' long, 5 hp electric gear-box drive, 81X chain, good workin...

40hp electric drive hyd unit, pressure comp pump, approx. 150 gal reservoir, includes cooling rad...

Hemco, 9 head drop saw trimmer, 7-1/2hp motors, 16' long capacity, includes infeed and waste conv...

5 strand green chain, 10' 6" wide x 50' long, 81X chain, electric drive, excellent condition

Edmiston board edger, set up for tailing belt, hyd blade movement, electric drive, includes laser...

unscrambler/ infeed deck, 4 strand deck, 10' wide x 15' long, all hyd drive, heavy duty and in go...

Precision 6' x 6' screen, hyd drive, good working condition

3 strand x 8' w x 44" h unscrambler, hyd drive, good working condition

Hershberger Mfg automatic slab saw, line-shaft ready, includes outfeed conveyor, good working con...

Roll case 24" wide x 19' long, 81/2" dia rollers, hyd drive, heavy duty and in good working condi...

Hanchett chipper knife sharpener, electric drive, good working condition

concave belt conveyor 36" wide belt x 45' long, electric drive, very good condition

Hydraulic tank, and 2 hydraulic pumps

Mellott vibrating conveyor 19" wide pan x 20' long, 4" tall sides, electric drive, sawdust screen...

Roll case, 24" wide x 19' long, hydraulic drive, very good condition

50' L, hyd drive, 24" pan, 8" sides, includes sawdust screen section and chipper infeed spout, hy...

roll case with 3 strand pop-up transfer deck, 24" wide x 20' long, heavy duty and in good condition

Reckart dust blower 24" dia blower, 10" inlet 8" outlet, electric drive, good working condition

roll case 24" wide x 22' long, heavy duty and in very good condition

roll case, 24" wide x 25' long, 6" dia rolls, good working condition

belt conveyor 12" wide x 20' long, approx 4" tall sides, hyd drive, working condition

6" x 36" capacity, 8' infeed/4' live outfeed, 1 movable & 1 stationary blade, this unit is comple...

concave style belt conveyor, 30" wide belt x 95' long, electric drive, has cat-walk on the side, ...

HMC 3 strand log deck, H-78 chain, stop-load for debarker, 10' 6" wide x 19' long, Tulsa Winch el...

4 strand transfer deck, 10' wide x 27' long, PRICE INCLUDES BRAND NEW 81X CHAIN, good condition

Precision 58" dia, 6 knives, COMPLETELY REBUILT!! comes with warranty, BRAND NEW condition! ready...

Hyd tank and cooler, approx 95 gal capacity, has cooling radiator and electric tank heater, very ...

Reckart dust blower, 29" dia, 10" inlet- 8" outlet, good working condition

Pendu slab drop belt, 24" wide x 10' 6" long, hyd drive, twin air cylinders for up-down on belt, ...

Mellott #8 log turner, good working condition

4 strand log deck, 10' wide x 20' long, Tulsa Winch hyd drive, stop-load arms, good condition and...

Morbark waste bark conveyor, 14" wide x 25' long, hyd drive, excellent condition

3 arm tilt hoist, arms made for 48" packs, electric drive, includes 3 strand 11'x 27'6" infeed de...

lumber carts, 40" wide x adjustable lengths, has back-board on end, up to 3 available, price is p...

lumber carts, 42" wide x 7'-12' long, assorted styles and sizes, good condition, (price is per pi...

Mellott vibrating conveyor, 5 sections total, no drive, includes sawdust section, good condition

Twin City blower fan, 5 hp electric drive, 19" inlet 14 1/2" x 19" outlet, good working condition

double end trim saw, 3" x 23' capacity, electric drive, good working condition

belt conveyor 16" wide x 7' long, 4" tall sides, no power, good condition

roll case, 34" overall width, 8-1/2" x 24" rollers x 23' long, includes hyd powered kickers, hyd ...

10 hp hydraulic power pack, 40 gal. tank, pump Model PVR15-15B15-RF-0-5-A-1, good condition

Meadows board edger, 4" thick x 36" wide capacity, infeed rollers, outfeed is a tilt table, line-...

slab drop belt, 24" wide x 10' long, built for left-hand mill, air cylinder for up-down motion, g...

3 strand green chain, 7' wide x 54' long, C-55 rooftop chain, electric drive, very good condition

3 strand transfer deck, 7' wide x 14' long, electric drive, C-55 rooftop chain, good working cond...

cant bunks, dead rollers, 5' wide x 20' long, good condition, 2 available, price is per piece

Log deck, 3 strands, 12' wide x 23' long, H-78 chain, electric drive, working condition

4 strand transfer deck, 8' wide x 14' long, electric drive, C-55 rooftop chain, good condition an...

roll case, 24" wide x 16' long, hyd/ gearbox drive, some rolls have spirals, air powered pop-up s...

live roll case, 24" wide x 27' long, 2-way cant kickers, kickers are air powered, very good condi...

3 strand log deck, 10' wide x 17' 6 " long, H-78 chain, hyd Tulsa Winch drive, stop-load arms, go...

roll case, 24" wide x 43' long, electric drive, comes in 2 sections, includes spiral section and ...

Mellott #7 log turner, hyd drive, good working condition

FIFO unscrambler, 6 strands, 13' 6" wide x 70" tall, electric drive, board singulator, very good ...

HMC drop belt, 24" wide belt x 13' long, air lift cylinder, good working condition

dust blower, 50" dia, 18"inlet/outlet, 40 hp electric motor for power, good working condition

belt conveyor, 2 sections, 24" wide x 25' long, one section is hyd drive the other section is ele...

Miner edger, 4" thick x 24" wide capacity, 1 stationary, 2 movabe blades, 5' infeed, 8' outfeed, ...

5 strand Mellott unscrambler, electric drive, 81X chain with lugs, 10' 6" wide x 59" tall, excell...

5 strand transfer deck, 10' 6" wide x 9' 6" long, 81X chain, electric gearbox drive, has air oper...

2 strand transfer deck, 32" wide x 10' 6" long, working condition

belt conveyor, 8" wide x 32' long, 1 1/2" tall sides, heavy duty and in very good condition, 2 av...

belt conveyor, 16" wide x 32' long, electric drive, 1 1/2" tall sides, heavy duty and in very goo...

belt conveyor, 30" wide x 9' long, hyd drive, good condition

Fulghum 48" dia, 6 knife chipper, recently in production, working condition

Roll-case/ transfer, 36" wide x 21' long, has 3-way sorting, tipple arms for both sides, air oper...

Northtech up-cut chop saw, 15 hp electric motor, 24" dia blade, air operated controls, excellent ...

Webster vibrating conveyor, 18" wide x 25' long, electric drive, good condition

Cornell gang edger, 6" thick capacity, edger side is 21" wide- gang side is 16" wide, 1 movable b...

Cornell style 24" dia blower, 10" inlet- 8" outlet, good condition

Reckart 4 strand transfer deck, 10' wide x 16' long, C-55 rooftop chain, electric drive, very goo...

Mellott roll case 24" wide x 15' long, no power, very good condition

belt conveyor 24" wide x 50' long, approx 4" tall sides, electric drive, good working condition

log deck, 3 strands 12' wide x 25' long, electric drive, H-78 chain, includes stop-load and 5' lo...

Keystone gang saw, 6" thick x 12" wide capacity, single arbor, indexable sizer head, electric pow...

2 strand transfer/ cant bunk, transfer deck has 2 pop-up arms 56" long for roll-case, 10' long de...

belt conveyor, 24" wide x 6' long, good condition

Mellott #8 log chain type log turner, RC140 chain and #80 drive chain, hyd. drive, good working c...

pan is 18" wide x 9" tall sides, 65' long, includes sawdust section, electric drive, good working...

2019 Accu-Cut edger, 6" x 40" capacity, 3 blades- 1 movable set, variable speed in-feed, includes...

belt conveyor 24" wide x 40' long, no sides, good working condition

Roll case, 30" wide x 41' long, has several sections of spirals and several stops, very good cond...

LH, 4 HB, opens to 36 in, carriage is 20 ft. in length, electric setworks, includes track/frame, ...

Model #7, RC160 chain, 48 in. Hyd. drive, GOOD CONDITION

with a 15 HP electric drive, VERY good condition

waste grinder, 24" wide infeed belt, 125 hp electric drive, good working condition

Showcase Rebuilt! Hurdle 3 head-block carriage, includes complete mill package, track/frame/ driv...

18" wide x 18' long, hyd drive, approx 4" sides, good condition

3 blades, 2 movable, 50hp electric drive, 6" capacity, good condition

Cedar Creek, 3 blade, 6" capacity, 30 hp electric drive, good condition

SN: 36-307, MN: 36, 3 head block, air dogs, tapers, setworks, 16' long, 50" wide center to center...

diverter for chip loading system, good condition, 1 available

16" dia, electric drive, good condition, 3 available

55" x 100" x 7' tall, has AC unit, is insulated, does not include any controls, includes all new ...

35' long, 18" pan, 8" sides, electric drive, includes chipper feed chute, good condition

Meadows 4" x 36" capacity edger, infeed/outfeed, 2 movable blades, includes 2 Brand New blades, t...

Fulghum 6 knife, 60" dia, top discharge, includes new knives, knife holders, and anvils in very g...

5 strand transfer deck, 12' 6" wide x 24' 6" long, electric drive, chains have rollers on top, go...

Twin City 40" dia exhaust fan, 125hp electric motor, 16" inlet-16" outlet, good condition

Weinig profile grinder, made for sharpening Weinig moulder knives, electric drive, very good cond...

roll case 20" wide x 13' long, heavy duty 6" dia rollers, dead rollers, good condition

Babbit melting pot and propane burner, includes ladle, jig and extra babbit, good condition

671 Detroit power unit, was used to run sawmill, 12,757 hours showing, good operating condition

Rees air lock, 16" inlet/outlet, electric drive, good working condition

Morbark 48" dia 3 knife chipper, Fulghum 5' x5' shaker screen w/ cyclone, electric drive on shake...

dust cyclone 20" dia x 5' tall, 6" inlet, electric drive, includes bag house, good working condition

roll case 24" wide x 20' long, 7" dia rolls, no drive, good condition

5 strand transfer deck, 25' long, custom width (call with your needs), S- style drive electric po...

Fast-Line sawyer/ operator cab, 5' x 10' x 6' tall, nice large size, good condition

Mellott drive section for vibrating conveyor, 17" wide pan x 10' long, good working condition

4 strand transfer deck, 10' wide x 26' long, 81XH chain, electric drive, good condition

4 strand green chain, 7" 6" wide x 53' long, 81X chain, electric drive, good condition

PHL chipper/ shaker, 6 knives 3 are blocked, includes shaker screen and chip blower, good working...

hyd unit, 20 hp electric drive, pressure comp pump, approx 80 gal tank, good condition

roll case with transfer, 24" wide x 12' long roll case, 3 strand pop-up transfer deck 10' 6" wide...

hydraulic reservoir, 32" wide x 56" long x 30" high x approx. 175 gal capacity, good condition

Hyd power unit, 30 hp electric power, pressure comp pump, approx 50 gal capacity, good condition

SMC air dryer, single phase 220 volts, air flow; 5200 l/min, working condition

Koger dust blower, 38" dia, top discharge, 18" inlet/ 16" outlet, good condition

Waste conveyor, 24" wide pan x 73' long, electric drive, ladder-back chain, working condition

roll case 31" wide x 14' long, Heavy duty, working condition

roll case 30" wide x 17' long, heavy duty and in very good condition

light duty roll case 52" wide x 60" long, electric drive, 2 1/2" dia rolls, working condition

16" wide x 9' incline belt conveyor approx. 4" tall sides, electric drive, excellent condition

Morbark waste grinder, horizontal feed, set up for line-shaft power, includes drag chain for prod...

Newman 4 knife sharpener, all automatic, electric powered, good working condition

belt conveyor 12" wide x 6' long, approx 4" tall sides, good condition

Reckart 36" chain type turner, all hyd powered, excellent condition

Webster vibrating conveyor drive section, 24" wide pan x 10' long, good working condition

Belt conveyor 24" wide x 18' long, approx 7" tall slanted sides, hyd drive, excellent condition

belt conveyor, 10" wide x 9' long, no drive, includes very good belting, sides are concave style

Roll case, 24" wide x 19'6" long, 4 1/2" dia rollers, hyd drive, includes self-contained hyd unit...

4 strand transfer deck, 12' 6" wide x 4' long, C-55 rooftop chain, hyd drive, good condition

Belt conveyor 4" wide x 15' long, approx 4" tall sides, electric drive, good working condition

CM&E 48" dia, 8 knife chipper, working condition but shows considerable wear, should be rebuilt, ...

circe saw husk, 56" dia blade, includes Tyrone Berry carriage drive, good working condition

Baker deduster, 8" wide capacity, electric drive, includes new brushes, excellent condition

belt conveyor 20" wide x 22' long, no drive, good working condition

2007 TimberKing 1600 - Hydraulic log loader, new hydraulic hoses - Kohler 25 HP gas engine with a...

Precision 58" dia chipper, 6 knives w/ 3 blocked, before and after pics, COMPLETELY REBUILT AND C...

Cleereman Complete Circular Mill - Cleereman Left Handset model 36 - 3 Headblocks - Silvatech com...

2006 Wood-Mizer LT40 Super Hydraulic - 51 HP CAT Engine - 6300 Hours - Debarker - Lube Mizer - Ac...

2 blades, hyd. cylinder for blade movement, in good condition

Sawmill bed with chainsaw bar head. No motor. 20 ft bed and 53" chainsaw bar head. Can cut horizo...

Cresswood style, 4" thick x 32" wide capacity, electric drive on feed rolls, complete unit ready ...

30' L, hyd drive, 17" pan, 4" sides, good condition

includes carriage track & frame, AC carriage drive, Mellott Operator cab, electric setworks, this...

Mellott roll case 30" wide x 18' long, rolls are 8" dia, heavy duty and in excellent condition

Precision 48" dia chipper, 6 knife- 3 are blocked, top discharge, working condition

8"x20" wide capacity, set up with stationary blades, 50 hp. electric drive, includes infeed rolle...

roll case, 24" wide x 16' long, hyd/ gearbox drive, some rolls have spirals, air powered pop-up s...

3 strand log deck, 10' wide x 17' 6 " long, H-78 chain, hyd Tulsa Winch drive, stop-load arms, go...

live roll case, 24" wide x 27' long, 2-way cant kickers, kickers are air powered, very good condi...

roll case, 24" wide x 43' long, electric drive, comes in 2 sections, includes spiral section and ...

Mellott #7 log turner, hyd drive, good working condition

HMC drop belt, 24" wide belt x 13' long, air lift cylinder, good working condition

FIFO unscrambler, 6 strands, 13' 6" wide x 70" tall, electric drive, board singulator, very good ...

Miner edger, 4" thick x 24" wide capacity, 1 stationary, 2 movabe blades, 5' infeed, 8' outfeed, ...

dust blower, 50" dia, 18"inlet/outlet, 40 hp electric motor for power, good working condition

belt conveyor, 2 sections, 24" wide x 25' long, one section is hyd drive the other section is ele...

5 strand Mellott unscrambler, electric drive, 81X chain with lugs, 10' 6" wide x 59" tall, excell...

5 strand transfer deck, 10' 6" wide x 9' 6" long, 81X chain, electric gearbox drive, has air oper...

Webster vibrating conveyor, 18" wide x 25' long, electric drive, good condition

Fulghum 48" dia, 6 knife chipper, recently in production, working condition

2 strand transfer deck, 32" wide x 10' 6" long, working condition

belt conveyor, 16" wide x 32' long, electric drive, 1 1/2" tall sides, heavy duty and in very goo...

Roll-case/ transfer, 36" wide x 21' long, has 3-way sorting, tipple arms for both sides, air oper...

belt conveyor, 30" wide x 9' long, hyd drive, good condition

belt conveyor, 8" wide x 32' long, 1 1/2" tall sides, heavy duty and in very good condition, 2 av...

Northtech up-cut chop saw, 15 hp electric motor, 24" dia blade, air operated controls, excellent ...

Cornell gang edger, 6" thick capacity, edger side is 21" wide- gang side is 16" wide, 1 movable b...

Cornell style 24" dia blower, 10" inlet- 8" outlet, good condition

Reckart 4 strand transfer deck, 10' wide x 16' long, C-55 rooftop chain, electric drive, very goo...

Mellott roll case 24" wide x 15' long, no power, very good condition

Keystone gang saw, 6" thick x 12" wide capacity, single arbor, indexable sizer head, electric pow...

log deck, 3 strands 12' wide x 25' long, electric drive, H-78 chain, includes stop-load and 5' lo...

belt conveyor 24" wide x 50' long, approx 4" tall sides, electric drive, good working condition

belt conveyor, 24" wide x 6' long, good condition

2 strand transfer/ cant bunk, transfer deck has 2 pop-up arms 56" long for roll-case, 10' long de...

Mellott #8 log chain type log turner, RC140 chain and #80 drive chain, hyd. drive, good working c...

2019 Accu-Cut edger, 6" x 40" capacity, 3 blades- 1 movable set, variable speed in-feed, includes...

pan is 18" wide x 9" tall sides, 65' long, includes sawdust section, electric drive, good working...

belt conveyor 24" wide x 40' long, no sides, good working condition

LH, 4 HB, opens to 36 in, carriage is 20 ft. in length, electric setworks, includes track/frame, ...

Roll case, 30" wide x 41' long, has several sections of spirals and several stops, very good cond...

Model #7, RC160 chain, 48 in. Hyd. drive, GOOD CONDITION

with a 15 HP electric drive, VERY good condition

waste grinder, 24" wide infeed belt, 125 hp electric drive, good working condition

Showcase Rebuilt! Hurdle 3 head-block carriage, includes complete mill package, track/frame/ driv...

Cedar Creek, 3 blade, 6" capacity, 30 hp electric drive, good condition

3 blades, 2 movable, 50hp electric drive, 6" capacity, good condition

18" wide x 18' long, hyd drive, approx 4" sides, good condition

SN: 36-307, MN: 36, 3 head block, air dogs, tapers, setworks, 16' long, 50" wide center to center...

16" dia, electric drive, good condition, 3 available

diverter for chip loading system, good condition, 1 available

55" x 100" x 7' tall, has AC unit, is insulated, does not include any controls, includes all new ...

Meadows 4" x 36" capacity edger, infeed/outfeed, 2 movable blades, includes 2 Brand New blades, t...

Fulghum 6 knife, 60" dia, top discharge, includes new knives, knife holders, and anvils in very g...

35' long, 18" pan, 8" sides, electric drive, includes chipper feed chute, good condition

5 strand transfer deck, 12' 6" wide x 24' 6" long, electric drive, chains have rollers on top, go...